Super User BGP1 Pneumatic Dead-Weight Tester Budenberg Industrial Dead-Weight Tester 15 to 1000 mbar / 1.5 to 100 kPa The Budenberg BGP base can be used with any BGP series piston, allowing testing from 15 mbar to 120 bar. The base requires a supply of gas slightly above test pressure, and has precision inlet / outlet valves and a screwpress to enable easy regulation and adjustment of pressure. The BGP1 has a 1/2in2 high chrome steel piston/cylinder unit. The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: The model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg dead weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates. Ranges from 15 to 1000 bar / 1.5 to 100 kPa Supplied with integral pressure generation BGP1 by Budenberg Features Range: From 15 to 1000 mbar / 1.5 to 100 kPa Standard Accuracy: To 0.015% Class ‘A’ Accuracy: To 0.006% Accessories: Two gauge stand, carry cases, vacuum adaptor etc Piston/Cylinder Unit: 1/2in2 high chrome steel Weights: Austenitic stainless steel Tool Roll: Containing all necessary items for immediate start-up (External gas supply required) The Budenberg is suitable for the following applications / industries Oil & Gas Petrochemical BGP1 Pneumatic Dead-Weight Tester Specification Sheet Download For more information on the BGP1 Dead Weight Tester DOWNLOAD PDF For more information on optional accessories DOWNLOAD PDF