Super User For precise volumetric flow measurement of clean liquids The Flomec® Large Capacity Flowmeters are suited for receipt verification, loading, un-loading & distribution management at petroleum depots, mine sites, marine & aviation facilities. The most common transfer applications involve fuels, oils, solvents, alcohols along with the blending of bio & ethanol fuels either pumped or gravity fed. These meters are compact and light weight in construction - important benefits when used in mobile installations or within confined spaces. NMI Approved Meters Meters 1" and above are available with optional NMI pattern approval and quadrature pulse output. Features High accuracy & repeatability, direct reading flowmeter 2 moving parts No requirement for flow conditioning ( straight pipe runs ) Various rotor material options Measures high & low viscosity liquids Quadrature pulse output option & bi-directional flow Integral 4-20mA output option Optional Exd I/IIB approval (ATEX, IECEx) Models & Specifications #twoj_fragment1-1 Meter Selection #twoj_fragment1-2 Options #twoj_fragment1-3 Downloads #twoj_fragment1-4 Flomec Flow Products Orbital Piston Models & Specifications OM080 OM080E OM100 OM100E Nominal Pipe Size 80mm (3") 80mm (3") E 100mm (4") 100mm (4") E *Flow range - GPM Flow range - LPM 10 - 200 35 - 750 13 - 260 50 - 1000 20 - 400 75-1500 40-660 150 - 2500 **Accuracy@3cp + 0.5% of reading (accuracy is + 0.2% of reading with optional RT12 with non-linearit correction) Repeatability typically + 0.03% of reding Temperature range -20°c ~ +120°c, refer to factory for lower temperature Maximum Pressure PSI (bar) Threaded Meters Aluminium meters 175 (12) 175 (12) 145 (10) 145 (10) 316 stainless steel 175 (12) - - - Electrical - for pulse meters (see also option outputs) Outut pulse resolution pulses / litre Reed switch 10.0 (2.65) 5.68 (1.55) 4.15 (1.10) 2.10 (.560) Hall effect 40.5 (10.70) 22.7 (6.00) 8.30 (4.40) 8.5 (2.24) QP - Quadrature Hall Option 20.0 (5.00) 11.4 (3.00) 8.30 (2.20) 4.24 (1.12) Reed switch output ** 30Vdc x 200mA max. [maximum thermal shock 10°c/minute] Hall effect output (NPN) 3 wire open collector, 5~24Vdc, 20mA max. Optional outputs 4-20mA, scaled pulse, quadrature pulse, flow alarms or two state batch control Physical Protection class IP66/67 (NEMA4X), optional Exd I/IIB T4/T6, integral ancillaries can be supplied I.S. (intrinsically safe) Overall dimensions Download Specification Sheet Recommended filtration 40 mesh (350 microns) * Maximum flow is to be reduced as viscosity increases, see flow de-rating guide. Max. recommended pressure drop is 100Kpa. (15psi) ** Accuracy + 1% of reading iwth M - Series mechanical regsiters and accuracy + 0/5% of reading with V series mechanical register Meter Selection Selecting the right meter for your application. Meters are selected based on flow range, pressure, temperature, material compatibility and functionality. Aluminium Multipulse meters ideal for petroleum products including oils and grease, fuels and fuel oils. Stainless steel meters suited for chemicals, water based products and the food, cosmetic and pharmaceutical industries. Blind Pulse meter are available with reed switch & Hall Effect options. Quadrature pulse & Integral 4-20mA outputs are optional. FLOMEC® meter options include integral LCD totalisers, flow rate totalisers & batch controllers. These instruments provide monitoring & control outputs including 4~20mA, scaled pulse, alarms & batch control and are also available with robust mechanical registers: BT LCD 5 digit reset, 8 digit cumulative totaliser. RT12 LCD 6 digit reset, cumulative totaliser & flow rate. Analogue and Pulse Outputs RT40 LCD 6 digit reset, cumulative totaliser & flow rate. Backlit Display EB LCD 6 digit 2 stage batcher & cumulative totaliser. M / V* = Mechanical registers ( see model numbering ) (Instruments also available for remote mounting and with I.S. approvals) Flomec Positivie Displacement Flow Meter Document Downloads coming soon
